Filtrar por

Categorias
  • +
    • +
      • +
        • +
      • +
      • +
    • +
    • +
    • +
    • +
    • +
      • +
    • +
  • +
    • +
    • +
      • +
    • +
      • +
        • +
        • +
        • +
        • +
      • +
      • +
    • +
    • +
  • +
    • +
    • +
      • +
    • +
    • +
    • +
    • +
      • +
  • +
    • +
    • +
      • +
    • +
      • +
        • +
        • +
        • +
  • +
    • +
  • +
    • +
      • +
Preço
Fabricantes

Categorias

Fabricantes

As maiores novidades!

Pesquisar  "key" Foram encontrados 389 resultados.

por página
  • Em stock

    -Blue/Green LED Lights/Easily Switchable -Three Reflective Screens -Expandable to 20 ft Wide -Adapter Rings Fit Variety of Cameras -Expandable Screens/Grommet/Pole Sleeves -Brightness Control & Blue/Green Selector -Remote Control Interface -For Use With HD and SD Systems -Working Range of 32 ft (10 m)

    750,00 €
  • Em stock

    SmallRig 11 inch Articulating Arm 2066 Key Features: 1.It is equipped with 1/4’’ screws on both ends respectively. 2.It could attach monitor via the 1/4’’ screw on the one end and attach accessories with 1/4’’-20 threaded holes on the other end. 3.Mounted with 1/4’’ screw is a rubber cushion which could prevent the scratches of monitor and help to...

    14,43 €
  • Em stock

    mallRig Super Lightweight 15mm-Railblock (2pcs Pack) 2061 Key Features: 1. It includes 2pcs of super lightweight 15mm-Railblock. 2. Each Super Lightweight 15mm-Railblock comes with two rod clamps for 15mm rods, which could be tightened via 2 rotatable wingnuts. 3. The adjustment of one wingnut will not affect the operation of the other wingnut. 4....

    15,76 €
  • Em stock

    Note: This product is NOT compatible with Manfrotto MHXPRO-BHQ6 ball head. Now a custom-designed left side grip for L bracket 2218 is also available. You can swap the side plate with this grip for video-shooting. Handheld shooting with your left hand and both hands is thus possible. Designer: Tracy Joy Co-designer: Daniel Ockeloen SmallRig...

    50,78 €
  • Em stock

    SmallRig Cage Kit for Sony RX100 III IV V 2105 Key Features: 1. The world's 1st cage for Sony RX100 M3/M4/M5/M5A. 2. Seats the camera firmly with the lens ring and blocks no access to ports and buttons. 3. Removable wooden side grip for a comfortable gripping experience in shooting. 4. Versatile interfaces (1/4” and 3/8” threaded holes, NATO rail...

    47,51 € 59,39 € -20%
  • Em stock

    SmallRig Cage for Panasonic G9 2125 Key Features: 1.Form-Fitted aluminum cage for Panasonic G9 2.Nato rails on both sides and multiple 1/4"-20 & 3/8"-16 & Arri 3/8”accessory mounting holes 3.Features an Arca Swiss plate on the bottom for tripod shooting 4.Unobstructed battery & top status LCD & port access 5.Hand strap hole on the right side...

    76,61 €
  • Em stock

    mallRig Tilt Monitor Mount 1842 Key Features: 1. Supports 5” or 7” Monitor up to 1.5kg. 2. Tilts 180° & Lockable in Any Position. 3. Includes Allen Wrench to Secure the Thumbscrew. 4. Protective Rubber Padding on Top. 5. Anti-off 1/4”-20 Screws. SmallRig Tilt Monitor Mount 1842 is designed to hold your monitor onto a camera cage, handle, or...

    34,34 €
  • Em stock

    SmallRig Cage for Atomos Ninja V 2209 Key Features: 1.A form-fitting cage designed for Atomos Ninja V; 2.NATO rails on the top and bottom; 3.1/4’’-20, 3/8’’-16 and ARRI locating holes; 4.A HDMI cable clamp included; 5.Drive locks for Atomos Master Caddy II. SmallRig Cage for Atomos Ninja V 2209 was co-designed with Atomos to provide an...

    111,03 €
  • Em stock

    SmallRig Lens Mount Adapter Support for BMPCC 4K 2247 Key Features: 1.Compatible with SmallRig Cage for BMPCC 4K 2203, 2254 and 2255; 2.Work with 3 Metabones and Viltrox EF-M2 Lens Mount Adapter. SmallRig Lens Mount Adapter Support for BMPCC 4K 2247 is designed to work with SmallRig BMPCC Cage 2203, 2254 and 2255. It mounts to the cage by two M4...

    12,82 €
  • Em stock

    SmallRig Cage for Canon EOS M50 and M5 2168 Key Features: 1.The First cage designed for EOS M50 and M5 in the market; 2.A comfortable grip moulded into the cage; 3.Multiple mounting interfaces (cold shoe, NATO rail, 1/4’’-20 and 3/8’’-16 threaded holes, Arri locating holes) for accessories; 4.A built-in Arca Swiss QR plate, 1/4’’-20 and 3/8’’-16...

    59,39 €
  • Em stock

    SmallRig Quick Release Safety Rail 7cm 1195 Key Features: 1. 7cm standard quick release safety nato rail is part of smallrig nato handle 2003. 2. It can be attached to any 1/4-20 holes via 1/4’’-20 screws. 3. It features spring loaded pins on both ends to prevent accidental removal. 4. Compatible with smallrig rigs with nato clamp, RED Epic, RED...

    6,77 €
  • Em stock

    SmallRig Swivel Monitor Mount with Arri Locating Pins 2174 Key Features: 1.Compatible with 5”or 7”monitor and supports monitor up to 1.5kg. 2.Locked via Arri 3/8”-16 screw on one end and 1/4”-20 screw on the other. 3.Allows to adjust the position of monitor up to 180 degree without using tools. 4.Features a hole on each end of screw for using a hex...

    42,18 €