Suspension Accessories
Suspension Accessories
- New Products
- Chroma Key System
- Easter 2026
- Lighting
- Camera Lighting
- Cary Cases and Transport Bags
- Daylight
- DMX Controller
- Fluorescent
- Fog Machine
- Kits
- Led
- Lighting Accessories
- Tungsten
- Machinery And Accessories
- Outlet
- Photography
- Promoções Swit
- Sets
- Supplies
- Video-Audio
- Batteries and Chargers
- Cameras
- Chromakey
- Control Panels
- Distribution-Amplifiers
- Editor
- Intercom
- Lenses
- Memory Card Reader
- Microphones
- Mobile Studios
- Monitors
- Multiviewer
- Network Storage
- Others Accessories
- Phone Rigs
- Recorders
- Routers-Hubs
- Signal Converters
- Software
- Streaming
- Video Capture
- Virtual Studios
- Wireless Video
- Vloggers
Suspension AccessoriesThere are 52 products.
Manfrotto RC08011 Spare Steel Pipe 30x1010 with steel cap
Em stockSpare part for Manfrotto C825
40,00 €Manfrotto FF3210 Bracket for Ceiling Attachment
Por encomendaBracket for ceiling attachment of the rail. It is advisable to pre-assemble these brackets onto the rails at ground level to ensure correct alignment before screwing to a ceiling.
27,72 €Manfrotto FF3211 Double Bracket for Rail Crossing
Por encomendaThis is used to permanently attach two rails at a right angle or parallel.
29,18 €Manfrotto FF3208 Rail Connector
Por encomendaA pair of clamp plates with screws to join two fixed rails together by clamping across the junction on the upper guide, using holes provided in the rail. IMPORTANT: the junction must always be supported by a rail-mounting bracket placed astride.
13,12 €Manfrotto FF3207 Kit of 4 End Stops with 4 Cable Carriages
Por encomendaThese fit to the holes on the ends of a rail to prevent carriages leaving the rail and to prevent moving rails leaving their carriages. IMPORTANT: must be fitted to upper and lower holes on moving rails but only to lower holes on fixed rails.
15,31 €Manfrotto FF3054 Top System 54
Por encomendaFlexible, compact and perfect for in-studio photography. This overhead lighting suspension helps professional photographers maximise space and compose their shoots quickly and efficiently.
4 642,33 €Manfrotto FF3212 Angle Bracket for Fixing to Beams
Por encomendaBracket for wall attachment of the rail.
30,63 €Manfrotto FF3214A Bracket for Ceiling Attachment without Rod
Por encomendaThis Bracket for Ceiling Attachment can be attached directly by screws or rods with a maximum diameter of 1/2''. Before mounting the bracket it is advisable to standardize the length of both the rods and screws. Fix the bracket between a nut allowing the screw on the inside of the bracket to protrude about 1,5cm.
26,26 €Manfrotto FF3215A Extension Bracket for Various Heights
Por encomendaIts length is adjustable from 10cm to 15,5cm. Using the clamp screw, you can obtain all intermediate sizes. Provided with a security lock, in case the regulating screw loosens, blocks the bracket at maximum extension.
64,20 €Manfrotto FF3215 Adjustable Mounting Bracket
Por encomendaAllows height differences in ceilings of maximum 2cm; combining two brackets you can compensate for differences of maximum 4cm.
41,57 €Manfrotto FF3214B Rail Mounting Bracket with M12 Stud
Por encomendaComprised of a bracket to be attached to the ceiling with 4 screws, a 1m long M12 rod completely threaded, 4 M12 nuts, and a bracket for the rail fixture. The rod can be cut to the desidered size and then attached to the bracket by way of the nuts supplied. The rod must protrude approx 1cm on the inside of the bracket.
59,08 €Manfrotto FF3214 Girder Mounting Bracket
Por encomendaThis can be fastened to tubes with diameters from 35mm to 50mm inclusive. It's used to directly support the rail that can be fixed in place either longitudinally or transversely. This bracket can be used as a brace for fixed supports, as well.
31,37 €Manfrotto FF3043 Top System 43
Por encomendaComplete kit for medium-sized studios composed of 2 fixed rails 4m long, 2 mobile rails 3m long and supports for 3 light sources (3 Top Pantographs).
3 383,07 €Manfrotto FF3033 Top System 33
Por encomendaComplete kit for small studios composed of 2 fixed rails 3m long, 2 mobile rails 3m long and supports for 3 light sources (1 Top Pantograph and 2 Telescopic Post).
2 465,99 €SWIT GA-PT20P Precise Positioning Pantograph
Por encomendaGA-PT20P pantograph is an overhead support system that offers precise control over the positioning and orientation of studio lights. It helps videographers achieve the desired lighting effects by allowing them to easily adjust the height, angle, and distance of the light source from the subject. The expansion length is 0.5m - 2m.
269,10 €SWIT GA-CR3009 3x3m Studio Light Ceiling Rail System
Por encomendaThe GA-RS3009 Ceiling Rail System is a professional studio lighting ceiling install solution, 3× 3 meters rails to install up to 9 studio lights, smooth overhead movements, saving floor space and ensuring a flexible, efficient, and clutter-free studio setup.
899,10 €SWIT GA-PT50P Precise Positioning Pantograph 5m
Por encomendaGA-PT50P pantograph is an overhead support system that offers precise control over the positioning and orientation of studio lights. It helps videographers achieve the desired lighting effects by allowing them to easily adjust the height, angle, and distance of the light source from the subject. The expansion length is 0.8m - 5m.
494,10 €SWIT GA-PT50E DMX Motorized Pantograph
Por encomendaGA-PT50E pantograph is an overhead support system that offers DMX motorized control up and down positioning of studio lights, 10cm/s speeed. The professional video studios can adjust the lights height by DMX console, and the expansion length is 0.8m - 5m, Max load 30kg.
899,10 €SWIT GA-PT30P Precise Positioning Pantograph
Por encomendaGA-PT30P pantograph is an overhead support system that offers precise control over the positioning and orientation of studio lights. It helps videographers achieve the desired lighting effects by allowing them to easily adjust the height, angle, and distance of the light source from the subject.
314,10 €SWIT GA-PT20E DMX Motorized Pantograph
Por encomendaGA-PT20E pantograph is an overhead support system that offers DMX motorized control up and down positioning of studio lights, 10cm/s speeed. The professional video studios can adjust the lights height by DMX console, and the expansion length is 0.5m - 2m, Max load 30kg.
629,10 €
